https://www.kce.url.tw/en/custom_15071.html  02. Input K type alter 4-20mA(INPT:K2 alter AN5)  02. Input K type alter 4-20mA(INPT:K2 alter AN5) ▇  Input K type alter 4-20mA 【INPT: K2 alter AN5】 I. Hardware: The lower left corner of S1 motherboard solder shorts II. Software:     1. Press and hold "MODE" key  5 sec to enter  LEVEL 2     2. Set "Lock=1111" 3. Press and hold "MODE" key + "<" key 5 sec to enter  LEVEL 4 4. Set "St-2-2=1"      (Default 0100 was revised to 0110) 5. Press AUT key Back to LEVEL1     (Press and hold "MODE" key for 5 Back to LEVEL1) 6. Press and hold "MODE" key + "<" key 5 sec to enter  LEVEL 3 7. Set Input "INPT=AN5" 8. Set range high point "PVHI=100" 9. Use corrector / correction input signal highs, lows value     INLO = 4mA = about 20     INHI = 20mA = about 5250  

▇  Input K type alter 4-20mA 【INPT: K2 alter AN5】


I. Hardware: The lower left corner of S1 motherboard solder shorts

II. Software:

    1. Press and hold "MODE" key  5 sec to enter  LEVEL 2

    2. Set "Lock=1111"

3. Press and hold "MODE" key + "<" key 5 sec to enter  LEVEL 4

4. Set "St-2-2=1" 

    (Default 0100 was revised to 0110)

5. Press AUT key Back to LEVEL1

    (Press and hold "MODE" key for 5 Back to LEVEL1)

6. Press and hold "MODE" key + "<" key 5 sec to enter  LEVEL 3

7. Set Input "INPT=AN5"

8. Set range high point "PVHI=100"

9. Use corrector / correction input signal highs, lows value

    INLO = 4mA = about 20

    INHI = 20mA = about 5250