▇ KC-6/8/900 Increase AL3
I. Hardware Review
1.In power board AL3 location the new electric with relay
2. The motherboard on the COM point AL3 point relative to the welding
3. Chassis 6.7 pin new terminal shrapnel
II. Software modifications
1. Press and hold "MODE" key 5 sec to enter LEVEL 2
2. Set "Lock=1111"
3. Press and hold "MODE" key + "<" key 5 sec to enter LEVEL 4
4. Set "St-2-1=1"
(Default 0100 was revised to 0101)
5. Press AUT key Back to LEVEL1
(Press and hold" MODE" key for 5 Back to LEVEL1)
6. Press and hold "MODE" key + "<" key 5 sec to enter LEVEL 3
7. Set "A3d3=11"