Products
Home Products Logger KCR-616 channel paperless recorder

KCR-616 channel paperless recorder

▇  Description
It is the Low Cost paperless recorder in bigger size 6.4" with highest resolution 640x480 pixels VGA TFT display, infrared detector, maximum 6 channels, plug & play I/O cards. It has many other unique features too, 12 soft keys for easy operation, universal input, the shortest depth 174mm, well designed portable handle, fully isolated channels, reliable and high capacity storage media CF card.

As a professional and experienced manufacturer, we supply high-performance and quality paperless recorders, video graphic recorders, paperless chart recorders, chart recorders, and temperature chart recorders.

▇ Features
6.4"Color TFT LCD with 640X480 pixels resolution
The Maximum Channels :
6 isolated analog input channels
Plug & Play Supported I / O card, 6 Slots
The High Flexibility :
User configurable l / O card
Expandable modular architecture
Flexible screen configuration
User-Friendly
Soft keys coupled with interactive dialog simplify
setup & operation procedures
Easy - to - access function keys
Infrared Detector:
Shut off LCD automatically to prolong LCD life
and save power while nobody near by
Save Space:
Only 174 mm (6.9") depth behind panel
Various Display Formats:
Vertical trend , Horizontal trend,
Bar Graph, Numerical or mixed
Save Data in Flash ROM,
Compact Flash Card or PC
Communication :
Standard Ethernet and optional RS-232 / 422 / 485
The Highest Accuracy
18 - bit A -D analog input, 15-bit D-A analog output.
Fast Sampling Rate:
Within 200 msec for all channels,
Programmable Filter or Moving Average Sampling Method
Statistics with Instant , Average , Min./ Max. Values
Progammable Alarms and Messages available
Portable / Bench Top Assembly Kit available


Specification
Hardware
Power 90-250VAC, 47-63Hz, 60VA, 30W maximum 
11-18VDC or 18-36 VDC, 60VA, 30W maximum
Display 6.4〞TFT LCD, 640X480 pixel resolution, 256 colors
Memory 8MB storage memory on board
Storage media: 128, 512 MB, 1 GB CF (Compact Flash) cards

 
Analog Input Cards (AI181, AI182, AI183)
Channels AI181 ~ 1 channel, AI182 ~ 2 channels, AI183 ~ 3 channels
Resolution 18 bits
Sampling Rate 5 times/ second
Maximum Rating -2 VDC minimum, 12 VDC maximum (1 minute for mA input)
Temperature Effect ±1.5 μV/ μC for all inputs except mA ±3.0 μV/ μC for mA input
Sensor Lead Resistance Effect T/C: 0.2 μV/ohm
3-wire RTD: 2.6 μC /ohm of resistance difference of two leads
2-wire RTD: 2.6 μC /ohm of resistance sum of two leads 
Burn-out Current 200nA 
Common Mode Rejection Ratio (CMRR) 120dB 
Normal Mode Rejection Ratio (NMRR) 55dB 
Isolation Breakdown Voltage between channels 430VAC min.
Sensor Break Detection Sensor opened for TC, RTD and mV inputs, 
below 1 mA for 4-20mA input, below 0.25V for 1-5V inputs,
unavailable for other inputs.
Sensor Break Responding Time Within 10 seconds for TC, RTD and mV inputs, 
0.1 second for 4-20 mA and 1-5V inputs.

 

Characteristics: 

Type Range  Accuracy@ 25 °C Input Impedance
J -120 ~ 1000 °C
(-184 ~ 1832 °F)
±1 °C 2.2MΩ
K -200 ~ 1370 °C
(-328 ~ 2498°F)
±1 °C 2.2MΩ
T -250 ~ 400°C
(-418 ~ 752°F)
±1 °C 2.2MΩ
E -100 ~ 900 °C
(-148 ~ 1652 °F)
±1°C 2.2MΩ
B 0 ~ 1820 °C
(32 ~ 3308 °F)
±2°C 2.2MΩ
R 0 ~ 1768 °C
(32 ~ 3214 °F)
±2°C 2.2MΩ
S 0 ~ 1768 °C
(32 ~ 3214 °F)
±2°C 2.2MΩ
N -250 ~ 1300 °C
(-418 ~ 2372 °F)
±1 °C 2.2MΩ
L -200 ~ 900 °C
(-328 ~ 1652 °F)
±1 °C 2.2MΩ
PT100
(DIN)
-210 ~ 700 °C
(-346 ~ 1292 °F)
±0.4°C 1.3KΩ
PT100
(JIS)
-200 ~ 600 °C
(-328 ~ 1112 °F)
±0.4°C 1.3KΩ
mV -8 ~ 70mV ±0.05% 2.2MΩ
mA -3 ~ 27mA ±0.05% 70.5Ω
0~1V -0.12 ~ 1.15V ±0.05% 32KΩ
0~5V -1.3 ~ 11.5V ±0.05% 332KΩ
1~5V -1.3 ~ 11.5V ±0.05% 332KΩ
0~10V -1.3 ~ 11.5V ±0.05% 332KΩ

 

Analog Input Cards (AI183V): 

Type Range  Accuracy@ 25 °C Input Impedance
-60~60mV -62~62mV ±0.1% 2.2 MΩ
-2~2V -2.2~2.2V ±0.3% 332KΩ
-20~20 V -22~22 V ±0.1% 332KΩ
-20~20 mA -22~22 mA ±0.1% 70.5Ω

 
Digital Input Card (DI181)
Channels 6 per card Logic
Low -5V minimum, 0.8V maximum
Logic High 2V minimum, 5V maximum
External pull-down Resistance 1KΩ maximum 
External pull-up Resistance 1.5MΩ minimum

 
Digital Output Card (DO181)
Channels 6 per card
Contact Form N.O.(Form A)
Relay Rating 5A/240 VAC, life cycles 200,000 for resistive load

 
Analog Output Card (AO183I, AO183V)
Channels 3 per card Output signal: AO183I: 4-20mA, 0-20mA, AO183V: 0-5V, 1-5V, 0-10V
Resolution 15 bits
Accuracy ±0.05% of Span ±0.0025% /°C
Load Resistance 0-500 ohms (current), 10K ohms minimum (voltage)
Output Regulation 0.01% for full load change
Output Setting Time 0.1 second (stable to 99.9%)
Isolation Breakdown Voltage 1000VAC min.
Integral Linearity Error ±0.005% of Span
Temperature Effect ±0.0025% of Span /°C

 
24VDC Auxiliary Power Supply Card (AP181)
Channels to be used for 6 transmitters
Output Rating 24 ± 1 VDC, 180mA in maximum, 30mA / each channel

 
COMM Module (CM181)
Interface RS-232 (1 unit), RS-485 or RS-422 (up to 247 units)
Protocol Modbus Protocol RTU mode
Address 1-247
Baud Rate 0.3 - 38.4Kbits / sec
Measured data Bits 7-8 bits
Parity Bit None, Even or Odd 
Stop Bit 1 or 2 bits 

 
Standard Ethernet Communication
Protocol Modbus TCP/IP, 10 Base T 
Ports AUI (Attachment Unit Interface) and RJ-45, Auto- detect capability

 
Infrared Detector
Distance Detect moving human body in distance around 2 meters
Time delayed 10, 20, 30, 40, 50 or 60 minutes to be defined

 
Real time clock accuracy vs. temperature inside of housing
Temperature inside housing typical error per month 10 ~ 40 °C 18 seconds
0 °C or 50 °C 52 seconds
-10°C or 60 °C 107 seconds

 
Environmental & Physical
Operating Temperature 5 ~ 50 °C 
Storage Temperature -25 ~ 60 °C
Humidity 20 to 80% RH (non-condensing), maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative humidity at 40°C
Altitude 2000 M maximum
Insulation Resistance 20 M ohms min. (at 500 VDC)
Dielectric Strength 1350 VAC, 50/60 Hz for 1 minute
Vibration Resistance 10-55 Hz, 10m/ s2 for 2 hours
Shock Resistance 30m/ s2 (3g) for operation, 100g for transportation
Operation Position no inclined restriction
Dimensions Panel Mount style: 166(W) x 144(H) x 174mm(D)
Bench Top style 166 (W) x 192 (H) x 194mm (D)
Standard Panel Cutout DIN size in 138 x 138mm

 
Approval Standards
Safety UL61010C-1,
CSA C22.2 No. 24-93
CE EN61010-1 (IEC1010-1) 
over voltage category II, Pollution degree 2
Protective Class IP 30 front panel for indoor use,
IP 20 housing and terminals
EMC Emission: EN61326 (EN55022 class A, EN61000-3-2, EN61000-3-3)
Immunity: EN61326 (EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)
 
Ordering Code
KCR-616 - - -
  1 2 3 4 - 5 6 7 - 8 9 10
1 Power 4: 90-250 VAC, 47-63 Hz
5: 20-28 VAC, 47-63 Hz
6: 11-18 VDC
7: 18-36 VDC
8. 36-72 VDC
9: Special order
2 Analog Input Card 0: none
1: 1 channel withAI181 G: 3 channels with AI183V
2: 2 channels with AI182 H: 6 channels with AI183V
3: 3 channels with AI183 J: 9 channels with AI183V
4: 4 channels with AI181 & AI183 K: 12 channels with AI183V
5: 5 channels with AI182 & AI183 L: 15 channels with AI183V
6: 6 channels with AI183 M: 18 channels with AI183V
A: 9 channels with AI183
B: 12 channels with AI183
C: 15 channels with AI183
D: 18 channels with AI183 *See AI181/2/3(V) in Accessories below.
3 Digital Input Card 0: none
1: 6 channels 4: 24 channels
2: 12 channels 5: 30 channels
3: 18 channels 6: 36 channels
4 Digital Output Card 0: none
1: 6 relays 3: 18 relays
2: 12 relays 4: 24 relays
5 Communication 0: standard Ethernet interface
1: RS-232/422/485 ( three in one ) + Ethernet interface
9: special order
6 PC software 1: Free basic software Observer I for non-communication application
2: Extensive software Observer II for communication of RS-232/422/485 or Ethernet
7 Firmware 0: Basic function
1: with Mathematics, Counter & Totalizer & FDA 21 CFR part 11 compliance
8 Storage Media 1. 512 MB Compact Flash card
6: 1 GB Compact Flash card
X: other options
9 Case/Mounting 1: standard panel mounting, grey case
2: Bench top / portable style with handle, USA power cable, grey case
3: Bench top with handle, European power cable, grey case
10 Special Option 0: none
1: 24VDC auxiliary power supply ( for transmitter, 6 channels )
2: 3-channel current output
3: 6-channel current output
4: 9-channel current output
D: 3-channel voltage output
E: 6-channel voltage output
F: 9-channel voltage output
5: panel mounting with rear power plug
6: panel mounting with front power switch
7: 7=1+5
8: 8=1+6
9: 9=1+5+6
X: other options


  

Logger 571475